Effects of Culture Dimensions on Maintenance of Porcine Inner Cell Mass-Derived Cell Self-Renewal

Abstract

Despite the fact that porcine embryonic stem cells (ESCs) are a practical study tool, in vitro long-term maintenance of these cells is difficult in a two-dimensional (2D) microenvironment using cellular niche or extracellular matrix proteins. However, a three-dimensional (3D) microenvironment, similar to that enclosing the inner cell mass of the blastocyst, may improve in vitro maintenance of self-renewal. Accordingly, as a first step toward constructing a 3D microenvironment optimized to maintain porcine ESC self-renewal, we investigated different culture dimensions for porcine ICM-derived cells to enhance the maintenance of self-renewal. Porcine ICM-derived cells were cultured in agarose-based 3D hydrogel with self-renewal-friendly mechanics and in 2D culture plates with or without feeder cells. Subsequently, the effects of the 3D microenvironment on maintenance of self-renewal were identified by analyzing colony formation and morphology, alkaline phosphatase (AP) activity, and transcriptional and translational regulation of self-renewal-related genes. The 3D microenvironment using a 1.5% (w/v) agarose-based 3D hydrogel resulted in significantly more colonies with stereoscopic morphology, significantly improved AP activity, and increased protein expression of self-renewal-related genes compared to those in the 2D microenvironment. These results demonstrate that self-renewal of porcine ICM-derived cells can be maintained more effectively in a 3D microenvironment than in a 2D microenvironment. These results will help develop novel culture systems for ICM-derived cells derived from diverse species, which will contribute to stimulating basic and applicable studies related to ESCs.

Keywords: agarose, culture dimension, embryonic stem cells, pig, self-renewal

INTRODUCTION

Among domestic animals, pigs have overwhelming anatomical, physiological, immunological, and genomic similarities to humans (Lunney, 2007; Meurens et al., 2012; Walters et al., 2001). As a laboratory animal model suitable for human medical research (Lunney, 2007), clinical translational studies (Hughes et al., 2003), drug efficacy evaluation (Donato et al., 1999), protein-based drug production (Van Cott and Velander, 1998), and xenotransplantation studies (Valdés-González et al., 2005) have been conducted extensively in porcine species. However, trials at the individual, organ, or tissue level have major limitations in effectiveness, efficiency, and accuracy, resulting in the need for more delicate manipulations at the cellular level. Accordingly, porcine embryonic stem cells (ESCs), which self-renew indefinitely and differentiate into the three germ layers that form the body (Vassiliev et al., 2010), offer a practical tool to address these needs.

Unfortunately, research concentrating on in vitro culture microenvironments to optimize physicochemical and physiological niches maintaining self-renewal has failed to identify effective culture technologies for long-term maintenance of undifferentiated porcine ESCs. Interest has been focused on the extracellular matrix (ECM) niche of culture systems. However, two-dimensional (2D) culturing of porcine ESCs on plates coated with ECM proteins, which contributes to self-renewal, has also failed to effectively maintain porcine ESCs in an undifferentiated state long term (Son et al., 2009).

In vivo, cells are surrounded by three-dimensional (3D) microenvironments that contain multiple ECM components and mixed cell populations (Baker and Chen, 2012), and 3D communication networks are formed through cell-to-cell and cell-to-ECM interactions that maintain the specificity of cells (Pampaloni et al., 2007). The provision of in vivo-like 3D microenvironments is very important for maintaining such specificity in vitro. Providing porcine ESCs with a 3D microenvironment similar to that enclosing the inner cell mass of blastocysts may improve the in vitro maintenance of ESC self-renewal.

Accordingly, as a first step toward constructing synthetic 3D microenvironments optimized to maintain porcine ESC self-renewal, the conditions needed to construct agarose-based 3D scaffolds were determined, and we sought to identify the culture dimension preferences of these cells. Porcine inner cell mass(ICM)-derived cells were cultured on 2D plates with or without feeder cells or on optimized agarose-based 3D scaffolds, and alkaline phosphatase (AP) activity and transcriptional and translational expression of genes specific to the undifferentiated state were analyzed.

MATERIALS AND METHODS

Cells and animals

Porcine ICM-derived cells with characteristics of ESCs derived from inner cell mass of porcine in vivo blastocysts ( Supplementary Fig. S1) were used in all experiments. Fetuses were derived from 13.5-day-old pregnant female ICR mice purchased from DBL (Korea) and used as embryonic fibroblast donors. All animal housing, handling, and experimental procedures were approved by the Institutional Animal Care and Use Committee (IACUC) of Kangwon National University (IACUC approval no. KW-140904-1) and conducted in accordance with the Animal Care and Use Guidelines of Kangwon National University.

Preparation of agarose-based 3D hydrogels and encapsulation of porcine ICM-derived cells

To construct agarose-based 3D hydrogels with different mechanical characteristics, 0.5, 1.0, or 1.5% (w/v) agarose powder (Sigma-Aldrich, USA) was dissolved in 1:1 low-glucose Dulbecco’s modified Eagle’s medium (DMEM; Welgene, Korea):Ham’s F-10 (Invitrogen, USA) with heating. Encapsulation of porcine ICM-derived cells into agarose-based 3D hydrogels was conducted by mixing cell clumps with each of the agarose solutions at 37°C and allowing them to solidify on glass slides coated with Sigmacote^® (Sigma-Aldrich) at 31°C in a humidified chamber under 95% air and 5% CO₂.

Culture of porcine ICM-derived cells

For 2D cultures, clumps derived from porcine ICM-derived cells dissociated mechanically were seeded in culture plates coated with or without mouse embryonic fibroblasts (MEFs) inactivated mitotically by 10 μg/ml mitomycin C (Sigma-Aldrich). For 3D cultures, porcine ICM-derived cell-derived clumps were incorporated into agarose-based 3D hydrogels as described above. Subsequently, porcine ICM-derived cells exposed to 2D or 3D microenvironments were cultured for 7 days in 1:1 low-glucose DMEM:Ham’s F-10 supplemented with 15% (v/v) heat-inactivated ES cell-screened fetal bovine serum (Hyclone, USA), 0.2 mM β-mercaptoethanol (Invitrogen), 1% (v/v) nonessential amino acids (Invitrogen), 1% (v/v) antibiotic–antimycotic solution (Welgene), and 2 ng/ml basic fibroblast growth factor (PeproTech, Inc., USA). The medium was replaced every second day. The characterized porcine ICM-derived cells ( Supplementary Fig. S1) were maintained over Passage 24, and porcine ICM-derived cells at Passage between 25 and 29 were allocated to each experiment.

Alkaline phosphatase (AP) staining

Cultured porcine ICM-derived cells were fixed in 4% (v/v) paraformaldehyde (Junsei Chemical Co., Japan). After two washes with Dulbecco’s phosphate-buffered saline (DPBS; Welgene), the fixed cells were stained with a solution containing 0.2 mg/ml napthol AS-MX phosphate (Sigma-Aldrich), 2% (v/v) N,N-dimethylformamide (Sigma-Aldrich), and 1 mg/ml Fast Red TR salt (Sigma-Aldrich) in 0.1 M Tris buffer (pH 8.2) for 90 min at room temperature. Subsequently, the stained cells were rinsed twice with DPBS, and the proportion of AP-positive cells was measured using a hemocytometer and an inverted microscope (CKX-41; Olympus, Japan).

Quantitative real-time polymerase chain reaction (PCR)

According to the manufacturer’s instructions, total mRNA was extracted from porcine ICM-derived cells harvested mechanically from agarose-based 3D hydrogels using the Dynabeads^® mRNA Direct™ Kit (Ambion, USA), and cDNA synthesis was performed using ReverTra Ace^® qPCR RT Master Mix with gDNA Remover (Toyobo, Japan). Subsequently, the expression levels of the specific genes were quantified using THUNDERBIRD™ SYBR^® qPCR Mix (Toyobo) on a 7500 Real time PCR system (Applied Biosystem, USA), and melting curve data were analyzed to determine PCR specificity. mRNA levels are presented as 2^−Δt values, where Ct = the threshold cycle for target amplification, ΔCt = Ct_{target gene} (specific gene Ct in a sample) − Ct_{internal reference} (GAPDH Ct in same sample). Primer sequences were designed using Primer3 software (Whitehead Institute/MIT Center for Genome Research) based on porcine cDNA sequences obtained from GenBank. See Supplementary Table S1. for additional PCR information and primer sequences.

Immunocytochemistry

Porcine ICM-derived cells harvested mechanically from agarose-based 3D hydrogels at 7 day of culture were fixed using 4% (v/v) paraformaldehyde for 20 min, washed twice with DPBS, and incubated for 5 min with REAL peroxidase blocking solution (Dako, Denmark). Cells were then incubated for 30 minutes at room temperature with a primary antibody detecting either OCT4, SOX2, NANOG, TRA-1-60, TRA-1-81, neurofilament, α-smooth muscle actin or cytokeratin 18 and rinsed twice with DPBS. Primary antibodies were localized by incubating for 30 min at room temperature using the REAL EnVision/HRP detection system (Dako), followed by two washes with DPBS and a 90-minute incubation with REAL DAB+ chromogen (Dako). Details and antibody dilutions used are provided in Supplementary Table S2. After staining, IMT iSolution Lite software (ver. 10.0, IMT i-Solution Inc., Canada) was used to measure the colony areas and the percentage of porcine ICM-derived cells within a colony expressing self-renewal-related proteins; the latter was presented as the area ratio × 100, where area ratio = the area of a colony stained positively with the specific antibody/total area of each colony.

Statistical analysis

All numerical data were analyzed using the Statistical Analysis System (SAS). Porcine ICM-derived cell colonies that proliferated and stained positively for AP were compared among treatment groups using a generalized linear model (PROC-GLM) in the SAS package. Protein and mRNA levels were compared by the least-squares or DUNCAN method when significant differences were detected by analysis of variance using SAS. p values less than 0.05 were regarded as indicative of significant differences.

RESULTS

Determination of optimal agarose-based 3D hydrogel conditions for maintenance of porcine ICM-derived cell self-renewal

To establish a formula for developing agarose-based 3D hydrogels that effectively support the maintenance of porcine ICM-derived cell self-renewal, agarose-based 3D hydrogels with different mechanical characteristics were constructed using varying agarose concentrations and evaluated by counting the number of porcine ICM-derived cell colonies showing evidence of AP activity and proliferation. As shown in Table 1, although there were no significant differences among experimental groups, the highest percentage of APpositive colonies (96.6%) was seen in the 1.5% (w/v) agarose-based 3D hydrogels, whereas the 0.5% (w/v) (85.7% AP positivity) and 1.0% (w/v) (88.9% AP positivity) agarose-based 3D hydrogels showed less than 90% AP positivity. Moreover, although the differences among experimental groups were not significant, substantial evidence of proliferation was observed in the porcine ICM-derived cell colonies in 1.0% (w/v) (26.5% of colonies) and 1.5% (w/v) agarose-based 3D hydrogels (30.0% of colonies); 0.5% (w/v) agarose-based 3D hydrogels showed the lowest percentage of colonies undergoing proliferation (5.9%) (Table 2). These results indicate that the 1.5% (w/v) agarose-based 3D hydrogels were the most competent in maintaining AP activity and stimulating proliferation in a 3D culture microenvironment customized for the maintenance of porcine ICM-derived cell self-renewal.

Effects of the 3D culture microenvironment on the maintenance of porcine ICM-derived cell self-renewal

Colony formation and morphology, AP activity, and the transcript and protein levels of self-renewal-related genes were compared between porcine ICM-derived cells cultured in 2D versus 3D microenvironments. As shown in Fig. 1, while successful formation of colonies was observed in all cultures, colony morphology and AP activity differed between the culture microenvironments. MEF-free 2D cultures induced the formation of colonies with discontinuous boundaries, extremely weak AP activity in the center and no AP activity in the rest except the center (Fig. 1B), whereas porcine ICM-derived cells cultured with MEFs in a typical 2D culture microenvironment formed colonies with well-defined boundaries, strong AP activity in the center and boundary and less intense AP activity in the rest except the center and boundary (Fig. 1A). Colonies with 3D morphology and overall strong AP activity were detected in the 3D culture microenvironment (Fig. 1C). In evaluating the potential to maintain AP activity during in vitro culture (Table 3), no colonies with AP activity were observed in MEF-free 2D cultures. However, in both MEF-coated 2D and MEF-free 3D cultures, all colonies exhibited AP activity, indicating that the 3D culture microenvironment prevents the decrease in AP activity characteristic of undifferentiated porcine ICM-derived cells. Regarding the transcriptional regulation of self-renewal-related genes (Fig. 2), the 3D culture microenvironment induced significantly stronger up-regulation of OCT4, SOX2, and TERT transcription than did the 2D culture microenvironments, with or without MEFs. However, compared with the expression levels seen in MEF-coated 2D cultures, NANOG transcription was significantly down-regulated in 3D cultures, albeit still higher than in MEF-free 2D cultures. Subsequently, strong expression of OCT4, SOX2, NANOG, TRA-1-60, and TRA-1-81 proteins was detected in porcine ICM-derived cells cultured in both 2D cultures with MEFs and 3D cultures, with weaker expression in MEF-free 2D cultures ( Supplementary Fig. S2). Furthermore, quantification of the expressed self-renewal-related proteins (Fig. 3) showed no significant differences in the protein expression of OCT4, NANOG and TRA-1-60 between porcine ICM-derived cells cultured in 2D with MEFs and porcine ICM-derived cells cultured in 3D. Rather, significant increases in SOX2 and TRA-1-81 proteins were observed in porcine ICM-derived cells cultured in agarose-based 3D hydrogels, relative to 2D cultures with MEFs. Porcine ICM-derived cells in MEF-free 2D culture microenvironments showed significantly lower protein expression of all self-renewal-related genes except SOX2. Thus, these results demonstrate that self-renewal of porcine ICM-derived cells can be maintained effectively, not only in 2D cultures with MEFs but also in 3D culture microenvironments, which appear to replace the need for MEFs in 2D cultures.

Figure 1

Figure 2

Figure 3

DISCUSSION

Here, we report the strong efficacy of 3D culture microenvironments for in vitro maintenance of porcine ICM-derived cell self-renewal. Porcine ICM-derived cells cultured in 1.5% (w/v) agarose-based 3D hydrogels showed significantly greater maintenance of AP activity and of self-renewal-related mRNA and protein expression than did those in 2D MEF-free cultures. Moreover, compared with 2D cultures coated with MEFs, no significant decrease in AP activity or in self-renewal-related protein expression was seen in 1.5% (w/v) agarose-based 3D hydrogels; in fact, porcine ICM-derived cells in these gels showed significant transcriptional and translational up-regulation of such genes. Accordingly, we suggest that the culture dimension should be considered when establishing in vitro culture systems for specific cells. The 3D scaffold itself, without added ECM analogs providing extracellular signals, can replace a variety of such signals derived from feeder cells that support the maintenance of self-renewal in typical 2D culture systems.

The mechanical properties of agarose-based 3D hydrogels can be regulated by altering the agarose concentration (Ulrich et al., 2011). Low concentrations of agarose result in softer hydrogels, whereas high concentrations result in mechanically stronger hydrogels. In the present study, porcine ICM-derived cells cultured in 1.5% (w/v) agarose-based hydrogels (the stiffest gels tested) showed the best AP activity and proliferation, indicating that porcine ICM-derived cells prefer a strong 3D scaffold to maintain their self-renewal. The effects of 3D hydrogel mechanics on stem cell self-renewal appear to vary among species and genetic backgrounds. Human (Dixon et al., 2014; Gerecht et al., 2007; Jang et al., 2013; Musah et al. 2012) and mouse (Lee et al., 2010; 2012) ESC self-renewal is maintained effectively using very strong (8-arm) and somewhat weak (4-arm) polyethylene glycol-based 3D hydrogels, respectively, where strength increases with the arm number. Therefore, we suggest that the optimal mechanical strength of scaffolds used in the construction of 3D microenvironments must be one of the factors considered in determining specific cell needs.

In previous studies, naïve mouse ESCs formed colonies from single cells with spherical morphology and clear boundaries in 3D culture (Lee et al., 2012). However, irregular colony morphologies, dependent upon the shapes of cell clumps incorporated into 3D hydrogels, were observed in the culture of primed porcine ESC colonies from mechanically dissociated clumps ( Supplementary Fig. S1) (Yuguo and David, 2013). This phenomenon was also observed in the culture of primed human ESCs, with characteristics similar to those of primed porcine ESCs in 3D culture (Jang et al., 2013; Lou et al., 2015). Therefore, we propose that the 3D microenvironment itself may be valuable in identifying pluripotent states (naïve or primed) of uncharacterized stem cells.

In this study, we have confirmed that self-renewal of porcine ICM-derived cells can be maintained more effectively in 3D microenvironments consisting of 1.5% (w/v) agarose-based 3D hydrogels than in 2D microenvironments, in the absence of any extracellular signals derived from ECM proteins. In addition, maintenance of porcine ICM-derived cell self-renewal in vitro should be possible by developing synthetic 3D microenvironments incorporating integrin signaling with ECM analogs to regulate cellular characteristics. These findings emphasize the importance of 3D microenvironments in the in vitro culture of various stem cells.

SUPPLEMENTARY MATERIALS

molce-40-2-117-supple.pdf

Article information

Mol. Cells.Feb 28, 2017; 40(2): 117-122.

Published online 2017-02-15. doi: 10.14348/molcells.2017.2223

Song Baek, Na Rae Han, Jung Im Yun, Jae Yeon Hwang, Minseok Kim, Choon Keun Park, Eunsong Lee, and Seung Tae Lee

¹Department of Animal Life Science, Kangwon National University, Chuncheon 24341, Korea

²Division of Animal Resource Science, Kangwon National University, Chuncheon 24341, Korea

³Department of Cellular and Molecular Physiology, Yale School of Medicine, New Haven 06510, USA

⁴Animal Nutrition and Physiology Team, National Institute of Animal Science, RDA, Wanju 55365, Korea

⁵Division of Applied Animal Science, Kangwon National University, Chuncheon 24341, Korea

⁶College of Veterinary Medicine, Kangwon National University, Chuncheon 24341, Korea

^*Correspondence: stlee76@kangwon.ac.kr

Received September 19, 2016; Accepted January 6, 2017.

This is an open-access article distributed under the terms of the Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/3.0/.

Articles from Mol. Cells are provided here courtesy of Mol. Cells

References

Baker, B.M., and Chen, C.S. (2012). Deconstructing the third dimension: how 3D culture microenvironments alter cellular cues. J Cell Sci. 125, 3015-3024.
Dixon, J.E., Shah, D.A., Rogers, C., Hall, S., Weston, N., Parmenter, C.D., McNally, D., Denning, C., and Shakesheff, K.M. (2014). Combined hydrogels that switch human pluripotent stem cells from self-renewal to differentiation. Proc Natl Acad Sci USA. 111, 5580-5585.
Donato, M.T., Castell, J.V., and Gómez-Lechón, M.J. (1999). Characterization of drug metabolizing activities in pig hepatocytes for use in bioartificial liver devices: comparison with other hepatic cellular models. J Hepatol. 31, 542-549.
Gerecht, S., Burdick, J.A., Ferreira, L.S., Townsend, S.A., Langer, R., and Vunjak-Novakovic, G. (2007). Hyaluronic acid hydrogel for controlled self-renewal and differentiation of human embryonic stem cells. Proc Natl Acad Sci USA. 104, 11298-11303.
Hughes, G.C., Post, M.J., Simons, M., and Annex, B.H. (2003). Translational physiology: porcine models of human coronary artery disease: implications for preclinical trials of therapeutic angiogenesis. J Appl Physiol. 94, 1689-1701.
Jang, M., Lee, S.T., Kim, J.W., Yang, J.H., Yoon, J.K., Park, J.C., Ryoo, H.M., van der Vlies, A.J., Ahn, J.Y., and Hubbell, J.A. (2013). A feeder-free, defined three-dimensional polyethylene glycol-based extracellular matrix niche for culture of human embryonic stem cells. Biomaterials. 34, 3571-3580.
Lee, S.T., Yun, J.I., Jo, Y.S., Mochizuki, M., van der Vlies, A.J., Kontos, S., Ihm, J.E., Lim, J.M., and Hubbell, J.A. (2010). Engineering integrin signaling for promoting embryonic stem cell self-renewal in a precisely defined niche. Biomaterials. 31, 1219-1226.
Lee, S.T., Yun, J.I., van der Vlies, A.J., Kontos, S., Jang, M., Gong, S.P., Kim, D.Y., Lim, J.M., and Hubbell, J.A. (2012). Long-term maintenance of mouse embryonic stem cell pluripotency by manipulating integrin signaling within 3D scaffolds without active Stat3. Biomaterials. 33, 8934-8942.
Lou, Y.R., Kanninen, L., Kaehr, B., Townson, J.L., Niklander, J., Harjumäki, R., Jeffrey Brinker, C., and Yliperttula, M. (2015). Silica bioreplication preserves three-dimensional spheroid structures of human pluripotent stem cells and HepG2 cells. Sci Rep. 5, 13635.
Lunney, J.K. (2007). Advances in swine biomedical model genomics. Int J Biol Sci. 3, 179-184.
Meurens, F., Summerfield, A., Nauwynck, H., Saif, L., and Gerdts, V. (2012). The pig: a model for human infectious diseases. Trends Microbiol. 20, 50-57.
Musah, S., Morin, S.A., Wrighton, P.J., Zwick, D.B., Jin, S., and Kiessling, L.L. (2012). Glycosaminoglycan-binding hydrogels enable mechanical control of human pluripotent stem cell self-renewal. ACS Nano. 6, 10168-10177.
Pampaloni, F., Reynaud, E.G., and Stelzer, E.H. (2007). The third dimension bridges the gap between cell culture and live tissue. Nat Rev Mol Cell Biol. 8, 839-845.
Son, H.Y., Kim, J.E., Lee, S.G., Kim, H.S., Lee, E., Park, J.K., Ka, H., Kim, H.J., and Lee, C.K. (2009). Efficient derivation and long term maintenance of pluripotent porcine embryonic stem-like cells. Asian-Aust J Anim Sci. 22, 26-34.
Ulrich, T.A., Lee, T.G., Shon, H.K., Moon, D.W., and Kumar, S. (2011). Microscale mechanisms of agarose-induced disruption of collagen remodeling. Biomaterials. 32, 5633-5642.
Valdés-González, R.A., Dorantes, L.M., Garibay, G.N., Bracho-Blanchet, E., Mendez, A.J., Dávila-Pérez, R., Elliott, R.B., Terán, L., and White, D.J. (2005). Xenotransplantation of porcine neonatal islets of Langerhans and Sertoli cells: a 4-year study. Eur J Endocrinol. 153, 419-427.
Van Cott, K.E., and Velander, W.H. (1998). Transgenic animals as drug factories: a new source of recombinant protein therapeutics. Exp Opin Investig Drugs. 7, 1683-1690.
Vassiliev, I., Vassilieva, S., Beebe, L.F., Harrison, S.J., McIlfatrick, S.M., and Nottle, M.B. (2010). In vitro and in vivo characterization of putative porcine embryonic stem cells. Cell Reprogram. 12, 223-230.
Walters, E.M., Wolf, E., Whyte, J.J., Mao, J., Renner, S., Nagashima, H., Kobayashi, E., Zhao, J., Wells, K.D., and Critser, J.K. (2001). Completion of the swine genome will simplify the production of swine as a large animal biomedical model. BMC Med Genomics. 5, 55.
Yuguo, L., and David, V.S. (2013). A fully defined and scalable 3D culture system for human pluripotent stem cell expansion and differentiation. Proc Natl Acad Sci USA. 110, E5039-5048.

Concentration (%, w/v) of agarose	No. of porcine ICM-derived cell colonies inserted into agarose-based 3D hydrogels	No. (%)a of porcine ICM-derived cell coloniesb stained positively by AP staining
0.5	28	24 (85.7)
1.0	27	24 (88.9)
1.5	29	28 (96.6)

Concentration (%, w/v) of agarose	No. of porcine ICM-derived cell colonies inserted into agarose-based 3D hydrogels	No. (%)a of porcine ICM-derived cell coloniesb experiencing proliferationc
0.5	34	2 (5.9)
1.0	34	9 (26.5)
1.5	40	12 (30.0)